If you have a fire or water emergency, please call us now at (817) 557-1447

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Blood Spills on Carpeted Floors

3/3/2020 (Permalink)

Blood Spills on Carpeted Floors

Put on Disposable Gloves: No matter what type of surface you’re cleaning, always put gloves on first.

Contain the Spill: After a spill, it is important to keep it as contained as possible to avoid allowing the affected area to spread. Create a barrier around the spill with an absorbent material.

Initial Disinfect: Once the area is contained, spray the affected area with an appropriate carpet detergent to help kill some of the surviving pathogens. After spraying the area, allow it to sit for 10 minutes so the disinfectant has time to work.

Blot up Excess Fluids: Use disposable towels or rags to blot as much excess fluid as you can and then carefully dispose of the soiled rags in a sealable bag.

Extract Absorbed Fluids: The carpet will absorb some of the fluid so removing them will be the next step. Use a wet-vacuum to thoroughly wet and remove any fluids. Repeat the process of wetting and suctioning several times. While wetting the affected area be sure to prevent any water from spreading beyond the initial boundary.

Re-disinfect: After vacuuming, thoroughly re-saturate the area with an appropriate disinfectant. Follow your carpet manufacturer’s recommendations since certain products can damage carpet fibers and dyes.

Let Sit: After completely disinfecting the area, allow the disinfectant to set and work for up to 20 minutes to make sure it has the full effect.

Third Disinfect: Repeat the previous two steps of disinfecting and then allowing to sit for 10-20 minutes.

Rinse: Once the final round of disinfecting is complete, rinse the area one last time to remove any remaining detergent or disinfecting solution. After rinsing, wet-vacuum the area.

Dry: Next, dry the area thoroughly with rags to draw out any remaining moisture and then place fans near the area to completely dry it,

Wrap up: After the area is clean, properly dispose of all rags and PPE contaminated by the spill. In addition, thoroughly clean all other equipment used during the spill cleanup.

https://cultureofsafety.thesilverlining.com/safety-tips/proper-blood-clean-up/

SERVPRO of North Arlington is here for all of your restoration needs.

Other News

View Recent Posts